AEROPAK art yellow color 400ml acrylic Spray Paint for wood with
AEROPAK Spray paints are well known for its superior quality,
excellent covering and fast drying, for internal and external use.
The 100% acrylic formula is able to withstand humid and cold
conditions. With 100 colors in total, AEROPAK offers one of largest
and accurate color range available in spray paint. spray paints can
be used on Metals, Plastics, Wood, Concrete or even Glass.
Standard Colors, Special Colors, Matte Shades, Metallic Shades,
Fluorescent Shades are available.
For best results, clean surface of grease, wax, rust and dust.
Scuff or lightly sand all glossy surfaces removing any unwanted
bumps or flaking paint, then dust off. Prime raw timber or metal
with Aeropak primer and allow to fully dry.
IMPORTANT : Shake the can vigorously for one minute before use.
Holding the can 30cm from prepared surface, begin by applying one
light mist coat, spraying in a continuous motion across the surface
working left to right. Pause, allowing the mist coat to set for 30
to 60 seconds, then apply additional coats working at 90° to the
first coat. If a thicker finish is required, allow at least one
hour between extra coats. When painting over existing paint always
Clean any over spray with mineral turps or general-purpose
thinners. For better long term storage, turn can upside down and
spray until no paint is coming out.
Spray unneeded product on to newspaper dispose to waste.
Empty can is recyclable.
Do not use near fire or naked flame.
Do not puncture or incinerate even if empty.
Keep in a cool place out of direct sunlight.
Do not store above 50°C. / 122 F
Never spray at eyes or face.
Keep out of reach of children
If swallowed seek medical advice immediately.
Warning - intentional misuse by deliberately inhaling contents
can be harmful or even fatal.